Casting Applications
Every casting in the catalog, what it is used for, how to specify one — and, on each page, where investment casting is the wrong answer for that part.
Valve Castings
Investment-cast valve bodies, bonnets, discs, balls and seats in CF8M, WCB, CA6NM and duplex, machined to ASME and API face-to-face dimensions.
- Ball Valve Body (2-Piece) ASTM A351 CF8M / API 608
- Ball Valve End Cap ASTM A351 CF8M / API 608
- Butterfly Valve Body (Wafer) ASTM A351 CF8 / API 609
- Butterfly Valve Disc ASTM A351 CF8M / API 609
- Check Valve Body (Swing) ASTM A216 WCB / API 594
- Check Valve Swing Disc ASTM A351 CF8M / API 594
- Gate Valve Body ASTM A351 CF8M / ASME B16.34
- Gate Valve Wedge Disc ASTM A351 CF8M / API 600
- Globe Valve Body ASTM A216 WCB / ASME B16.34
- Valve Bonnet ASTM A351 CF8M / ASME B16.34
- Valve Plug (Control Valve) ASTM A351 CF8M / IEC 60534
- Valve Seat Ring ASTM A351 CF8M
Pump Castings
Pump housings, volutes, covers, wear rings and diffusers cast to net shape in stainless, duplex and nickel-aluminum bronze for corrosive and abrasive service.
- Centrifugal Pump Housing (Volute) ASTM A351 CF8M / ISO 5199
- End Suction Pump Casing ASTM A351 CF3M / EN 733
- Mechanical Seal Housing ASTM A351 CF8M
- Pump Cover Plate ASTM A351 CF8M
- Pump Diffuser ASTM A351 CF8M
- Pump Shaft Sleeve ASTM A743 CA6NM
- Pump Wear Ring ASTM A743 CA6NM
- Submersible Pump Bottom Plate ASTM A351 CF8M
Impellers & Rotating Parts
Closed and open impellers, turbine wheels, rotors and fan wheels produced by lost wax casting where blade profile and dynamic balance decide performance.
- Axial Fan Rotor ASTM A351 CF8
- Bow Thruster Impeller ASTM B148 C95800 NAB
- Closed Pump Impeller ASTM A351 CF8M / ISO 5199
- Marine Propeller (3-Blade) ASTM B148 C95800 NAB
- Motor Rotor Blank ASTM A743 CA15
- Open Vortex Impeller ASTM A351 CF8M
- Radial Fan Wheel ASTM A351 CF8
- Semi-Open Pump Impeller ASTM A351 CF8M
- Slurry Pump Impeller ASTM A532 / CD4MCu
- Turbine Wheel ASTM A757 / Inconel 713C
Brackets, Levers & Arms
Mounting brackets, levers, arms, forks, yokes and clevises cast to shape with the machined hole pattern and boss faces held to drawing.
- Actuator Lever Arm ASTM A351 CF8M
- Cast Connecting Arm ASTM A743 CA15
- Cast Link Plate ASTM A743 CA40
- Cast Mounting Bracket (L-Type) ASTM A351 CF8 / made to drawing
- Cast Standoff Support ASTM A216 WCB
- Cast Yoke ASTM A216 WCB / made to drawing
- Clevis Bracket ASTM A351 CF8M / made to drawing
- Flat Mounting Bracket ASTM A216 WCB / made to drawing
- Fork End (Clevis Fork) ASTM A351 CF8M / DIN 71752
- Machine Lever ASTM A352 LCB / made to drawing
- Pipe Support Bracket ASTM A351 CF8 / MSS SP-58
Pipe Fittings & Connectors
Elbows, tees, couplings, reducers, nozzles and flanged connectors cast in stainless and alloy steel for pressure, sanitary and instrument service.
- 45° Elbow (Flanged) ASTM A351 CF8M / ASME B16.5
- 90° Elbow (Butt-Weld End) ASTM A351 CF8M / ASME B16.9
- 90° Elbow (Flanged) ASTM A351 CF8M / ASME B16.5
- Concentric Reducer ASTM A351 CF8M / ASME B16.9
- Equal Tee (Flanged) ASTM A351 CF8M / ASME B16.5
- Flanged Connector (Stub End) ASTM A351 CF8M / ASME B16.5
- Injection Nozzle Housing ASTM A743 CA6NM
- Pipe Coupling (Threaded) ASTM A351 CF8M / ASME B16.11
- Reducing Tee ASTM A351 CF8M / ASME B16.5
- Spray Nozzle Body ASTM A351 CF8M
- Union Body ASTM A351 CF8M / ASME B16.11
Housings & Enclosures
Gear housings, bearing housings, gearbox covers, manifolds and sealed enclosures cast hollow with cored passages and controlled wall thickness.
- Bearing Housing (Split) ASTM A216 WCB / made to drawing
- Explosion-Proof Junction Housing ASTM A351 CF8M / IEC 60079-1
- Gear Housing ASTM A216 WCB / made to drawing
- Gearbox End Cover ASTM A216 WCB
- Hydraulic Manifold Block ASTM A351 CF8M / made to drawing
- Pillow Block Housing ASTM A216 WCB / ISO 113
- Sealed Instrument Enclosure ASTM A351 CF8M / IP66
- Worm Gear Housing ASTM A216 WCB / made to drawing
Marine Hardware Castings
Deck hardware, cleats, chocks, rudder and propeller components in CF8M, duplex and nickel-aluminum bronze for permanent seawater exposure.
- Bow Roller Bracket ASTM A743 CF8M
- Deck Chock (Fairlead) ASTM A743 CF8M
- Marine Hose Fitting ASTM A743 CF8M
- Mooring Cleat ASTM A743 CF8M / ISO 15085
- Propeller Shaft Coupling ASTM A743 CA6NM
- Rudder Bearing Bracket ASTM B148 C95800 NAB
- Sea Water Strainer Body ASTM B148 C95800 NAB
- Stanchion Base ASTM A743 CF8M
Automotive & Vehicle Castings
Turbocharger, exhaust, steering and driveline castings in heat-resistant stainless and low-alloy steel, produced to PPAP-ready dimensional control.
- Exhaust Elbow (Heat Resistant) ASTM A297 HK40
- Exhaust Manifold Flange ASTM A297 HK30
- Steering Knuckle Arm ASTM A148 Gr 90-60 / made to drawing
- Suspension Mounting Bracket ASTM A148 Gr 90-60
- Tie Rod End Housing ASTM A148 Gr 105-85
- Transmission Shift Fork ASTM A732 Gr 8620
- Turbocharger Compressor Wheel ASTM B26 A356-T6
- Turbocharger Turbine Housing ASTM A297 HK30 / GX40CrNiSi25-12
Industrial Machinery Castings
Gear blanks, sprockets, coupling hubs, cams and frame components cast close to final size to cut machining stock on hard alloys.
- Bevel Gear Blank ASTM A732 Gr 8620
- Cam Follower Body ASTM A743 CA40
- Cast Machine Frame Node ASTM A216 WCB / made to drawing
- Cast Sprocket ASTM A743 CA40 / ISO 606
- Chain Wheel ASTM A743 CA15
- Coupling Hub ASTM A743 CA15 / made to drawing
- Flexible Coupling Half ASTM A216 WCB
- Gear Blank (Spur) ASTM A732 Gr 8620 / made to drawing
Energy & Turbine Castings
Turbine blades, nozzle rings, burner and compressor components in heat-resistant HK/HP grades and nickel superalloys for high-temperature duty.
Food, Dairy & Medical Castings
Sanitary fittings, food machinery parts and surgical or orthopedic components in CF3M and CoCr, finished to hygienic surface requirements.
Architectural & Hardware Castings
Door and lock hardware, furniture fittings and decorative castings in stainless and brass where surface finish is part of the specification.
Custom & Made-to-Drawing Castings
Prototype, thin-wall and complex precision castings produced from your drawing or 3D model when the part fits no standard family.